Miele PT 6185, Operating Instructions Manual

Page: 12 / 20

Cleaning the exterior
Before cleaning, disconnect the machine
from the power supply via the power main
switch.
Do not use a high pressure cleaner or
water jet to clean the machine.
Never use abrasive cleaners, scouring
pads, steel wool or caustic (oven)
cleaners on the dryer. They will damage
the surface.
^
All surfaces can be cleaned with warm
water and liquid dish soap applied with a
soft sponge.
^
Wipe dry using a soft cloth.
^
After drying starched laundry, clean the
interior of the drum with a damp cloth.
Annual maintenance
The following should be checked and if
necessary serviced once a year by an
authorized Miele technician:
– Heater element and heater shaft for
electrical heating
– The whole interior of the tumble dryer
– Fins on the ventilation fan
If proper maintenance is not performed
regularly the machine may lose efficiency
and operational faults posing a fire hazard
could occur.
Cleaning the lint filter
The lint filter must be cleaned before or
after every program or when the
"
l
Check lint filter" indicator lights.
^
Open the door and remove the lint filter.
^
Wipe the lint off the filter with your hand,
do not use any sharp objects!
^
Any lint remaining in the hollow part of the
door can be removed through the gap at
the bottom with a dust brush or vacuum.
^
Return the lint filter and close the door.
The lint filter can be rinsed with hot water
if necessary.
^
Dry the lint filter before putting it back in
place.
Cleaning and Care
12