Miele ProLine CS 1013-1 Operating And Installation Instructions Download | Manualshive

Page: 35 / 60

background image

Installation

*INSTALLATION*

35

Safety distances

Safety distance above the ProLine
appliance

A minimum safety distance must be
maintained between the ProLine
appliance and the rangehood above it.
See the rangehood manufacturer's
operating and installation instructions
for details. If the rangehood
manufacturer's instructions are not
available or if flammable objects are
installed above the ProLine appliance
(e.g. wall units, utensils rail etc.), a
minimum safety distance of 600 mm
must be maintained between these
objects and the highest part of the
ProLine appliance below.

When two or more ProLine
appliances which have different
safety distances are installed
together below a rangehood, you
should observe the greatest safety
distance.

Clearance underneath the appliance

A minimum safety clearance of 30 mm
must be provided underneath the
appliance.

Please note that clearance must also be
provided for the installation of the
flexible gas connection hose and mains
electrical cable if the appliance is to be
installed above a closed surface (e.g.
an oven).

«
...
33
34
35
36
37
...
»

Summary of Contents for ProLine CS 1013-1





























































Reviews:

No comments

Related manuals for ProLine CS 1013-1

Brand: Unigas Pages: 132

Brand: Rasmussen Pages: 16

Brand: CLEAN BURN Pages: 134

Brand: Unigas Pages: 32

Brand: Schuett Biotec Pages: 40

Brand: Inciner8 Pages: 12

Brand: Riello Pages: 88

Brand: Riello Pages: 34

Brand: baltur Pages: 96

ThermJet TJ0015 - 2000

Brand: Eclipse Pages: 20

Brand: baltur Pages: 64

CARRIER ALM 125/2

Brand: Alarko Pages: 29

Eclipse ImmersoJet

Brand: Honeywell Pages: 17

Brand: Town & Country Fireplaces Pages: 8

Brand: Town & Country Fireplaces Pages: 20

Brand: Town & Country Fireplaces Pages: 48

Brand: Town & Country Fireplaces Pages: 52

Brand: Town & Country Fireplaces Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands