Operation
42
End of programme
The programme has finished when
Finished
appears in the display and
the door has opened slightly (if
applicable).
The drying fan may continue to run for
a few minutes at the end of the
programme.
Open the door completely to re-
engage the door closing mechanism.
You can now remove the load items.
If you have deactivated the
automatic door opening function (see
“Settings menu, AutoOpen”), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
Switching off
At the end of a programme sequence:
The dishwasher can be switched off
at any time using the
button.
Switching the dishwasher off during a
programme stops the programme.
Switching the dishwasher off during the
run-up to a delay start time (FlexiTimer)
will also stop the process.
If the dishwasher is not going to be
used for a longer period of time, e.g.
whilst on holiday, the stopcock
should be closed as a precaution.
Removing load items
Load items tend to break and chip more
easily when they are hot. Allow the
items to cool until they are comfortable
enough to handle before unloading
them.
If you open the door fully after switching
off, the load items will cool much faster.
First unload the lower basket, then the
upper basket and finally the cutlery tray
(if present).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the load items in the lower
basket.
Summary of Contents for PG 8110 SmartBiz
Page 35: ...Preparing the load items 35 Cutlery basket Heavily soiled items ...
Page 87: ......