Factory default
If you have changed any settings from
the factory default, you can reset them
back to the factory default settings. An
activated External Dos and its
respective amount of detergent or
dosage concentration will not be reset.
^
Select
Reset
and press the center
button to confirm.
Select last program
You can chose whether to preset the
Normal program or the last selected
program.
^
Select the desired setting and press
the center button to confirm.
Temp. display
During a program the current
temperature is displayed as factory
default setting.
If the temperature display is turned off
the remaining run time is being
displayed during a program.
^
Select the desired setting and press
the centre button to confirm.
To close the Settings menu
You can close the Settings menu with
Finish
.
^
Select
Finish
and press the center
button to confirm.
The last selected program is displayed
briefly and the respective indicator light
comes on.
After a short while, the estimated
program runtime is displayed.
Settings
53
