en - Technical data
21
Peak-load negotiation (optional)
Supply voltage for control contacts
AC 230 V
Minimum cross-section for connection cable
5×1.5 mm²
Miele recommends using a flexible connection cable with an additional isolation option to establish the connection. The isolator should
remain visible once the tumble dryer has been installed and must be freely accessible.
Machine data
Machine width, total
1206 mm
Machine height, total
1640 mm
Machine depth, total
1385 mm
Niche width
1550 mm
Recommended wall spacing (up to the front edge of the machine)
1800 mm
Minimum wall spacing (up to the back edge of the lid)
500 mm
Packaging width
1390 mm
Packaging height
1766 mm
Packaging depth
1474 mm
Maximum gross volume
3618.3 l
Maximum gross weight
312.4 kg
Maximum net weight
294.3 kg
Max. floor load in operation
3.535 N
Diameter of exhaust duct
150 mm
Drum diameter
1100 mm
Diameter of drum opening
520 mm
Drum depth
876 mm
Drum volume
800 l
Diameter of door opening
520 mm
Maximum door opening angle
180°
Emission sound pressure level
63 dB(A) re 20 µPa
Sound power level
72
Average heat dissipation rate into the room
4 MJ/h
Permissible ambient temperature range
2–40 °C
Fixing options
Fixing without plinth
Quantity
Screw size
Tensioning strips
2
Wood screws DIN 571 (Ø × length)
2
6×40 mm
Plugs (Ø × length)
2
10×50 mm
If the tumble dryer is being installed without a plinth, fixing it in place is recommended.
Fastenings for floating screed must be supplied by the customer on site.
