Problem solving guide
65
Message
Cause and remedy
Clean the fluff filter.
Check the airways.
lights up after a
programme has
been cancelled.
You have attempted to dry only a few items of vary-
ing size. A smaller item has been sucked into the
loading area in the door and is clogging the holes in
the laundry deflector.
To delete the message: touch the
OK
sensor con-
trol.
Open the tumble dryer door.
Remove the item that is blocking the holes.
Always dry small, individual items together with
larger items.
If you are able to exclude all this, an even more major
problem has occurred. See below.
The system has been clogged by fluff or detergent
residue.
Clean all lint filters and air channels.
Check whether the fluff filters in the loading area
and plinth are free from damage and in good work-
ing order.
If you have removed the plinth filter, also check the
filter insert behind it. Clean it if necessary.
If you have removed the filter insert, also check the
heat exchanger behind it. Clean it if necessary.
Please see “Cleaning and care” for notes on clean-
ing. Damaged, deformed or uncleanable fluff filters
must be replaced.
To delete the message: touch the
OK
sensor con-
trol.
Clean the fluff filter.
Check the air-
ways.
continues
to light up after a
programme has
been cancelled,
despite thorough
cleaning.
The plinth filter looks clean after thorough cleaning.
However, the programme terminates and the error
message appears again. It is likely that there is still
underlying residue that could not be removed.
To delete the message: Touch the
OK
sensor con-
trol.
Replace the plinth filter with a new one.
You can reactivate the removed, “old” plinth filter
in the washing machine. Follow the instructions
described in “Problem solving guide – Reactivating
the plinth filter”.
Summary of Contents for PDR 507 HP Marine
Page 90: ......