Supervisor level
71
Delay start
The type of time input for the delay
start function can be changed or
switched off.
– Off
The delay start function is not avail-
able for selection.
– End of programme (factory default)
With the delay start function, you
specify at what time the programme
should end.
– Beginning of programme
With the delay start function, you
specify at what time the programme
should begin.
– Time until start
With the delay start function, you
specify after how many hours a pro-
gramme should begin (up to 96 h).
Programme name
When selecting a standard pro-
gramme, the name of the selected
drying is shown in the display.
– Factory default: on
When a programme is selected, the
programme name is displayed for a
few seconds before the display
shows the main menu.
– Off
The main menu is displayed immedi-
ately.
Drying level Cottons
Drying level Minimum iron
Drying level Automatic plus
You can alter the drying levels for the
Cottons, Minimum iron and Automatic
plus
programmes.
Changing this setting leads to increased
energy consumption.
It can be set to one of 7 different levels.
Factory default: normal
Drying level Machine iron
The
Machine iron
drying level in the
Cottons
programme can be individu-
ally adapted.
Changing this setting leads to increased
energy consumption.
You can change the residual moisture in
this programme to one of 11 levels from
16 % (more dry) to 26 % (more moist).
Factory default: 20 %
