manualshive.com logo in svg

Miele KWT 6722 iG S, Operating And Installation Instructions

Share
Download
Miele KWT 6722 iG S Operating And Installation Instructions Download Page 10

Warning and Safety instructions

10

 

If the wine conditioning unit is used for storing food which con-

tains fat or oil, make sure that it does not come into contact with
plastic components as any spillages of oil or fat could cause stress
cracks to the plastic and cause it to break or split.

 

Do not store explosive materials in the wine conditioning unit or

any products containing propellants (e.g. spray cans). Electrical
components could cause flammable vapours to ignite. Danger of fire
and explosion.

 

Do not operate any electrical equipment inside the wine condition-

ing unit. Danger of sparking and explosion.

 

Only use genuine original Miele accessories and spare parts with

this appliance. Using accessories or spare parts from other manu-
facturers will invalidate the warranty, and Miele cannot accept liabil-
ity.

Summary of Contents for KWT 6722 iG S





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands