Frequently asked questions
51
Messages in the display
Message
Possible cause and solution
The alarm symbol
is
lit up in the display and
an alarm is also sound-
ing.
The door alarm has been activated.
Close the appliance door. The alarm sym-
bol
will go out and the alarm will stop.
The alarm symbol
is
flashing in the display
and an alarm is also
sounding.
The temperature in the wine conditioning unit has
risen higher or fallen lower than the temperature
which has been set.
For instance, this could be due to
– the door being opened too frequently,
– blocked ventilation grilles,
– a lengthy interruption to the power supply.
Correct the condition that caused the alarm. The
alarm symbol
will go out as soon as the cause
of the alarm has been rectified.
The Change Active Air-
Clean filter symbol
is
lit up.
This is the reminder to change the Active AirClean fil-
ter.
Replace the Active AirClean filter and then confirm
the filter change in settings mode (see "Active Air-
Clean Filter").
A dash is lit up up/flash-
ing in the display.
Only temperatures within the range of the appliance
temperature will be displayed.
The sym-
bols
F1
to
F3
or
S1
to
S3
a
ppear in the display.
There is a fault.
Contact Miele Technical Service.