^
Remove cover
o
from the top of the
appliance door.
^
Place the door on upper hinge pin
k
.
^
Swing the door slowly inwards so that
lower hinge pin
g
fits into the guide
on hinge bracket
b
.
^
Close the door and align it both
vertically and horizontally.
^
Insert screw
a
into the outer hole of
hinge bracket
b
and tighten to
secure the hinge pin in the hinge
bracket.
^
Carefully lever recessed handle
fascia
p
away from the door by
inserting a flathead screwdriver into
groove
q
as shown.
Be careful not to let the screwdriver
slip and cause damage to the
appliance.
^
Carefully remove handle fascia
p
towards the right hand side.
^
Now insert handle fascia
p
into the
handle strip on the opposite side of
the door. Work it in methodically until
it is sitting flush at the sides.
^
Place cover caps
f
and
o
into the
now open handle strip
from the
inside
so that the plugs are not
visible from the outside.
Changing the door hinging
34
