Preparing the custom door
^
Open the appliance door.
^
Unscrew the installation supports
n
from the appliance door.
^
Loosen the remaining screws from
the strips
o
on each side of the door,
then remove.
^
Set aside the screws and side strips
o
- you will need them again later.
^
Take off the light switch cover.
^
Close the appliance door.
^
Measure the distance
X
between the
bracket and the overhead
furniture/fixtures.
^
Loosen the two nuts.
Set aside the nuts - you will need
them again later.
^
With the inside facing up, lay the
custom door on a stable surface (to
avoid scratch marks, place some
plastic or a cloth on the surface).
Installation
53
Summary of Contents for KWT 1601 Vi
Page 32: ...32 ...
Page 40: ...Niche dimensions Dimensions 40 ...
Page 41: ...Dimensions 41 ...
Page 63: ...63 ...
