Miele KWT 1601 Vi, Operating And Installation Manual

Page: 55 / 68

^
Measure the distance X between the
bracket and the overhead
furniture/fixtures.
^
Loosen the two nuts.
Set aside the nuts - you will need
them again later.
^
With the inside facing up, lay the
custom door on a stable surface (to
avoid scratch marks, place some
plastic or a cloth on the surface).
^
Mark the distance X on the back-side
of the custom door.
^
Also calculate and mark the center of
the custom door
Y .
^
Remove the mounting frame from the
appliance door and position it
according to the markings on the
custom door.
^
Pre-drill the holes.
^
Tightly screw on the bracket using
the pre-drilled holes:
Attach the bracket to each
attachment point with at least one
screw.
^
Attach the bracket at the top with at
least 6 screws:
The bracket includes a variety of holes
for the various design options of
custom doors.
When performing any work on the
custom door, always observe the
following:
– Always select the best load-bearing
surface of the custom door as the
location for screws.
– Select a screw length that is shorter
than the thickness of the door front.
^
Secure the door handle to the front of
the appliance from the inside.
Installation
55