Installation
-
I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-
70
Installation
Two people are required for in-
stalling the appliance.
The appliance must be empty
when it is installed.
Move the appliance carefully on
floors that are sensitive to scratching
to prevent damage.
For easier installation there are trans-
port handles on the back at the top
and transport wheels underneath the
appliance.
Prepare the appliance for installation
as close as possible to its intended
installation location.
Connect the appliance to the electri-
city supply as described in “Electrical
connection”.
Move the appliance carefully to its in-
tended installation location.
Position the appliance with the wall
spacers (if used) or the back close to
the wall.
Risk of damage to the appliance
door.
The appliance doors could hit the
wall of the room resulting in damage
to the doors.
Protect the glass doors by fitting a
felt stopper, for example, to the wall
of the room.
Aligning the appliance
To align the appliance, adjust the
front feet using the spanner supplied
Levelling the appliance door
Ensure
that you unscrew the ad-
justable foot
from the lower hinge
plate with the enclosed spanner until
it sits on the floor. Then unscrew the
foot by a further ¼ turn.
