Miele KM6357, Operating And Installation Instruction

Page: 50 / 84

You can change the default settings of the programme
options (see chart). Several settings can be altered in
succession.
After selecting programming mode,
P
(Programme) and
S
(Status) will appear in the timer display. On hobs with 3
cooking zones, an additional indicator will appear at the rear
left.
The programme is shown in the numerical keypad displays at
the front left and rear left. Example:
Programme 3 = front left
3
, rear left
0
Programme 14 = front left
4
, rear left
1
The status is shown in the numerical keypad display at the
rear right.
Once you have left the programming mode, the hob will be
reset automatically. This is completed when an indicator
above the
s
sensor lights up briefly.
Do not switch the hob on again until the reset process is
completed.
To call up programming mode
^
With the hob switched off, touch the
s
and
$
sensors at
the same time until the safety lock indicator light flashes.
To set the programme setting
^
To set the units position touch the relevant number on the
front left numerical keypad.
^
To set the tens position touch the relevant number on the
rear left numerical keypad.
To set the status setting
^
Touch the appropriate number on the front right numerical
keypad.
To save settings
^
Touch the
s
sensor until all the displays go out.
To not save settings
^
Touch the
$
sensor until all the displays go out.
Programming
50