You can change the default settings of the programme
options (see chart). Several settings can be altered in
succession.
After selecting programming mode,
P
(Programme) and
S
(Status) will appear in the timer display. On hobs with 3
cooking zones, an additional indicator will appear at the rear
left.
The programme is shown in the numerical keypad displays at
the front left and rear left. Example:
Programme 03 = front left
3
, rear left
0
Programme 14 = front left
4
, rear left
1
The status is shown in the numerical keypad display at the
rear right.
To select programming mode
^
With the hob switched off, touch the
s
and
$
sensors
at
the same time
until the safety lock indicator light flashes.
To set the programme
^
To set the
units position
touch the relevant number on the
front left
numerical keypad.
^
To set the
tens position
touch the relevant number on the
rear left
numerical keypad.
To set the status
^
Touch the appropriate number on the
front right
numerical
keypad.
To save settings
^
Touch the
s
sensor until all the displays go out.
To not save settings
^
Touch the
$
sensor until all the displays go out.
Programming
52
