Switching on
The hob must be switched on before
any of the zones can be used.
Do not leave the appliance
unattended whilst it is being used.
To switch the hob on
^
Touch the ON/OFF sensor
s
.
0
appears in each of the cooking zone
displays. If no further entry is made, the
hob will switch itself off after a few
seconds for safety reasons.
To switch a cooking zone on
^
Briefly touch the area under the
cooking zone display required once.
A
0
will flash in the display.
^
Whilst the
0
is flashing, select a
power setting of between
1
and
9
by
touching the
-
or
+
sensor.
To select cooking
with
Auto heat-up,
press the
-
sensor first (see "Auto
heat-up"). To select cooking
without
Auto heat-up, press the
+
sensor first.
The power setting selected flashes in
the display for a few seconds to start
with and then lights up constantly.
To change a power setting which has
already been set, touch the sensor
under the relevant cooking zone
display once briefly. The power setting
can then be changed using the
-
and
+
sensors.
Use
20
