Installing the cooktop
^
Feed the cooktop connection cable
down through the cut-out.
^
Position the cooktop loosely onto the
spring clamps.
^
Using both hands, press down
evenly on the sides of the appliance
until it clicks into position. When
doing this, make sure that the seal of
the appliance sits flush with the
worktop on all sides.
Do not use any additional sealant
(e.g. silicone).
If, during installation, you find that the
seals on the corners are not flush
with the worktop, the corner radius
ß
R4 can be carefully scribed to suit.
^
Connect the cooktop to the mains.
^
Check that the cooktop works.
Removing the cooktop
If the cooktop is accessible from below,
push it out from underneath.
In stubborn cases, or if the cooktop is
not accessible from below, use a
cooktop lever (available from Miele) to
lift up the cooktop. To prevent damage
to the worktop, position a cloth or
similar under the cooktop lever.
Warning: Do not use a screwdriver to lift
up the cooktop as this will damage the
appliance.
Installation
47
