Switching on
The hob must be switched on before
any of the zones can be used.
To switch the hob on:
^
Touch the ON/OFF sensor
s
.
0
appears in each of the cooking zone
displays. If no further entry is made, the
hob will switch itself off after a few
seconds for safety reasons.
To switch a cooking zone on:
^
Briefly touch the area under the
cooking zone display required once.
A
0
will flash in the display.
^
Whilst the
0
is flashing, select a
power setting of between
1
and
9
by
touching the
-
or
+
sensor.
To select cooking
with
Auto heat-up,
press the
-
sensor first (see "Auto
heat-up"). To select cooking
without
Auto heat-up press the
+
sensor first.
The power setting selected flashes in
the display for a few seconds to start
with and then lights up constantly.
To change a power setting which has
already been set, touch the sensor for
the relevant zone once briefly. The
power setting can then be changed
using the
-
and
+
sensors.
Operation
17
Summary of Contents for KM 500
Page 47: ...47 ...
Page 48: ...Alteration rights reserved 3106 M Nr 06 707 900 02 en GB ...
