Overheating protection
The induction coil on a cooking zone
can overheat if:
– the pan is not conducting heat
properly
– fats or oils are heated up on the
highest power setting.
The overheating protections works on
the affected cooking zone in one of the
following ways:
– If the rear cooking zone with the
Booster function is affected and the
Booster is switched on, then the
Booster will be switched off.
– If power setting
9
has been set, the
9
will flash, alternating with the
8
, i. e.
the cooking zone power level has
been reduced to
8
.
– The affected cooking zone switches
itself off automatically. The display
first shows a
0
and then the residual
heat indicator.
The cooking zone can be used again
as soon as it has cooled down to a safe
level.
To prevent the overheating protection
from cutting in again:
– use pots and pans which conduct
heat properly.
– heat fats or oils up on a medium
power setting only.
Operation
24
Summary of Contents for KM 418
Page 33: ...33 ...
Page 34: ...34 ...
Page 35: ...35 ...
Page 36: ...Alteration rights reserved 3707 M Nr 05 621 621 03 ...