Re-assemble the burner as follows
(see illustration):
^
Make sure that all the locating tabs
and notches line up exactly. Place
the burner head
c
on to the burner
base
f
so that the ignitor and the
ignition safety device extend through
their respective holes in the burner
head. The burner head must click
into place correctly.
^
Replace the burner cap
b
ensuring
that the locating tabs fit into the
notches in the burner head.
Important: replace parts in the correct
order after cleaning.
1. Do not replace the parts upside
down.
2. The locating tabs must fit exactly
into the notches.
Cleaning and care
20
Summary of Contents for KM 405
Page 26: ...26 ...
Page 27: ...27 ...
Page 28: ...Alteration rights reserved 4406 M Nr 05 721 800 07 en ...
