Miele KM 2012, Operating Instructions Manual

Page: 22 / 44

Cleaning Notes
Stainless steel
surfaces Clean stainless steel surfaces using an Original
Miele all purpose microfibre cloth or with a
solution of warm water and a little washing-up
liquid applied with a soft sponge.
If required, clean the appliance with the rough
side of a sponge and a few drops of the Original
Miele ceramic and stainless steel cooktop
cleaner (see "Optional accessories").
Apply with an even pressure following the
direction of the "grain".
The Original Miele care product for stainless
steel can be used after cleaning to help keep
your appliance looking good (see "Optional
accessories"). Apply sparingly with a soft cloth
following the instructions on the packaging. Printed surfaces
(Flame symbols)
The printing can be damaged
if soiling (e.g. food or fluids
that contained salt, olive oil)
are not removed immediately.
Remove any soiling immedi-
ately.
Do not use any stainless steel
cleaner on printed surfaces.
This would rub off the print.
Pan support Remove the cover. These areas should only be
cleaned with a microfibre cloth or with a solution
of warm water and a little washing-up liquid
applied with a soft sponge.
If necessary, the reverse side of a non-scratching
washing-up sponge can be used. Stubborn soiling should be
soaked first.
Not dishwasher safe.
Control knob Control knobs should only be cleaned with a
microfibre cloth or with a solution of warm water
and a little washing-up liquid applied with a soft
sponge. Not dishwasher safe.
Burner caps Burner caps should only be cleaned with a
microfibre cloth or with a solution of warm water
and a little washing-up liquid applied with a soft
sponge.
If necessary, the reverse side of a non-scratching
washing-up sponge can be used. Not dishwasher safe.
Burner head
PerfectClean
Burner heads should only be cleaned with a
microfibre cloth or with a solution of warm water
and a little washing-up liquid applied with a soft
sponge.
If necessary, the reverse side of a non-scratching
washing-up sponge can be used. The surface of the burner
heads is treated with
PerfectClean enamel, which
has very good
anti-stick
properties and is easy to
clean .
Not dishwasher safe.
Make sure that the flame slits
are clean and completely dry.
Ignitor
Ignition safety
device The ignitor and ignition safety device should be
very carefully wiped clean using a well wrung out
cloth. Do not let the ignitor get wet.
If it gets wet, it will not spark.
Cleaning and care
22