^
Pull off the cover
g
, and unscrew the
hinge bracket
h
.
^
Insert the pin
i
into the second hole
of the hinge bracket
h
.
^
Rotate the steel angle
j
and the
cover
k
180° each, then fit them on
the opposite side.
^
Screw the hinge bracket
h
on the
opposite side. The
M4 screw
must
be screwed into the left hole of the
hinge bracket.
^
Now rotate the cover
g
180° and
mount it on the opposite side.
^
In the middle of the appliance,
exchange the cover
l
and the
bearing bracket
m
, as follows:
Unscrew the cover
l
and the
bearing bracket
m
, rotate them 180°,
and screw them into place on the
opposite side.
^
Pull the bearing bushing
n
downward and out of the bearing
bracket
m
, then re-insert it into the
bearing bracket from the top.
^
Remove the plugs from the door
bearing bushings at the top of the
appliance doors, and fit them into
place on the opposite side.
^
Hang the upper appliance door on
the pin
i
, and close the appliance
door.
^
Insert the middle bearing pin
e
through the bottom of the bearing
bracket
m
in the upper appliance
door.
^
Check to see that the upper
appliance door is properly aligned.
Make any needed adjustments by
using the length holes in the bearing
bracket
m
.
^
Hang the lower appliance door on
the pin
e
, and close the appliance
door.
^
Insert the lower hinge bracket
b
in
the door bearing bushing in the lower
appliance door, and screw it
completely onto the housing.
^
Snap on the cover
a
.
Changing the door hinging
44
