Miele KFN 8667 S-1, Operating And Installation Instructions

Page: 35 / 52

Door handle
Aluminium is affected by the way that
light falls on it, by the surrounding
environment and by the angle you
observe it from.
The aluminium coloured handle may
suffer discolouration or damage if
soiling is left on it for too long.
Remove any soiling straight away.
Warning: The handle is susceptible to
scratches and abrasions.
In addition to the cleaning agents
mentioned previously, you should also
avoid
– stainless steel cleaners,
– cleaning agents containing
descaling agents,
– cleaning agents containing chloride,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners.
– abrasive sponges, e.g. pot scourers,
or sponges which have been
previously used with abrasive
cleaning agents.
– dishwasher detergent.
Ventilation gaps
^
The ventilation gaps should be
cleaned regularly with a brush or
vacuum cleaner. A build-up of dust
will increase the energy consumption
of the appliance.
Door seals
Do not use any grease or oil on the
door seals as these will cause the
seals to deteriorate and become
porous over time.
The door seals should be cleaned
regularly with clean water and then
wiped dry with a soft cloth.
Metal grille at the back of the
appliance
The metal grille at the back of the
appliance (heat exchanger) should be
dusted at least once a year. A build-up
of dust will increase the energy
consumption of the appliance.
When cleaning the grille, make sure
that the pipework and other
components do not get broken or
damaged in any way.
Cleaning and care
35