^
Press the sides of the lamp cover
together
a
, disengage the cover and
unclip it at the rear
b
.
^
Unscrew the lamp and replace it with
a new one.
Lamp specification:
220 - 240 V, max. 25 W, E 14 fitting.
^
Screw the new lamp into the
connection. Ensure it goes in
correctly and make sure that seal
c
makes a tight fit.
^
Replace the cover by clipping it in at
the rear and then pressing it in at the
sides.
. . . the floor of the refrigerator is wet.
The drain hole is blocked.
^
Clean the condensate channel and
drain hole.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
To prevent unnecessary loss of
temperature it is advisable not to
open the doors while waiting for the
appliance to be serviced.
Problem solving guide
33
