Miele KFN 7784 D Page 35 Operating Instructions Manual Download

Page: 35 / 96

Guide to the appliance

Adjusting the interior fittings

Using the door-shelf fine adjustment

Use the fine adjustment if you need
greater height clearance on the door
shelf/bottle shelf.

You can change the height of the door
shelf while it is loaded.



Hold the door shelf in both hands,
press the gray buttons on both sides
under it and move it.

Repositioning the door shelf with fine
adjustment

Only move the door/bottle shelves in
the appliance door when they are
empty.



Take hold of the sides of the door
shelf with both hands so that you are
touching each of the gray buttons un-
derneath it.



Press the gray buttons at the same
time and slide the door shelf up and
off the guide rails.



Remove the guide rail from the lugs
and move it to the desired position.



Move the second guide rail parallel to
the first rail.



Push the shelf down onto the guide
rails.

Moving the door shelf/bottle shelf

Only move the door/bottle shelves in
the appliance door when they are
empty.



Push the door/bottle shelves upward,
then remove them by pulling them
forward.



Replace the door/bottle shelves at
the required height.

Summary of Contents for KFN 7784 D

































































































Search results

Summary of Contents for KFN 7784 D

Reviews:

Related manuals for KFN 7784 D

Brands by name

Popular brands

Miele KFN 7784 D, Operating Instructions Manual

Search results

Summary of Contents for KFN 7784 D

Reviews:

Related manuals for KFN 7784 D

Brands by name

Popular brands