Miele KFN 15842 D ed/cs Operating And Installation Instructions Download

Page: 72 / 88

Changing the door hinging

Removing the upper soft-close
mechanism



Open the upper appliance door.



If a door seal is damaged the

door will not close properly and
cooling performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage the door seals.



Loosen the panel



from the soft-

close mechanism by inserting a flat-
headed screwdriver into the gaps
from below and, taking care,
gradually lift the panel off.



Push the panel



toward the

appliance and leave it hanging there
between the door and appliance for
the time being.



Place the safety device



(supplied

with the refrigerator) on the soft-close
mechanism



so that it engages.

The safety device prevents the hinge
from snapping shut.

Do not remove the red safety device
until instructed to do so.



Gently loosen the cover



from the

latch by inserting a flat-headed
screwdriver from above and below.

Summary of Contents for KFN 15842 D ed/cs

























































































Search results

Summary of Contents for KFN 15842 D ed/cs

Reviews:

Related manuals for KFN 15842 D ed/cs

Brands by name

Popular brands

Miele KFN 15842 D ed/cs, Operating And Installation Instructions

Search results

Summary of Contents for KFN 15842 D ed/cs

Reviews:

Related manuals for KFN 15842 D ed/cs

Brands by name

Popular brands