Replacing the upper soft-close door
mechanism
^
Remove cover
a
from panel
b
,
rotate it by 180° and refit it on the
other side.
^
Clip the spacer into position on the
handle side (A).
^
Then clip the soft-close mechanism
into position on the hinge side (B).
Then push both parts from the
middle until they click firmly into
position.
^
Screw the spacer and the soft-close
mechanism together securely using
screw
c
.
^
Attach panel
b
to soft-close
mechanism bracket
d
.
^
Push cover
e
on from the side so
that the openings for the pin
f
are
vertically aligned.
^
Align bracket
d
to the hinge plate,
and insert pin
f
from above so that
the right angle fits into the recess.
^
Clip cover
e
into position.
Make sure that cover
e
fits properly so
that the door can be closed without
hindrance and the pin is protected.
Changing the door hinging
70
