^
Hang the panel
b
on the shock
absorber arm
d
.
^
Pull the shock absorber arm
d
towards the hinge bracket and insert
the pin
e
from the top so that the
square rests in the recess.
^
Put on the cover
f
in such a way
that it engages.
Take care that the cover
f
is seated
correctly to ensure that the door closes
properly and the pin is secured.
^
Remove the securing device
g
.
^
Place the panel
b
onto the soft-close
mechanism from above, engaging it
at the bottom first and then at the top.
^
Close the bottom door of the
appliance.
Mounting the top door of the
appliance:
^
Place the top door of the appliance
on the bearing pin
i
in the middle of
the appliance.
^
Close the top door of the appliance.
^
Put the hinge bracket
n
on the
opposite side and and fasten it with
the screws
m
.
The screw holes may have to be
pre-punched or use a power
screwdriver.
^
Now place the cover
k
on the
opposite side.
^
Align the appliance door with the
appliance housing via the elongated
holes in the bottom hinge bracket.
Tighten the screws.
Changing the door hinging
59
