Miele KFN 12823 SD ed Operating And Installation Manual Download Page 46

Page: 46 / 48

The appliance doors can be aligned
with the housing at a later date.

In the following illustration the door
is not shown in the closed position to
make it easier to see what happens
next.

To align the

lower door

use the long

outer slots in the lower hinge plate:

Remove centre screw

from the

hinge plate.

Slightly loosen both outer screws

Align the door by sliding the hinge
plate to the left or right.

Then tighten screws

again. Screw

does not need to be refitted.

To align the

upper door

use the long

outer slots in the middle hinge plate:

Remove centre screw

from the

hinge plate.

Slightly loosen both outer screws

Align the door by sliding the hinge
plate to the left or right.

Then tighten screws

again. Screw

does not need to be refitted.

Aligning the appliance doors

Summary of Contents for KFN 12823 SD ed

















































Search results

Summary of Contents for KFN 12823 SD ed

Reviews:

Related manuals for KFN 12823 SD ed

Brands by name

Popular brands

Miele KFN 12823 SD ed, Operating And Installation Manual

Search results

Summary of Contents for KFN 12823 SD ed

Reviews:

Related manuals for KFN 12823 SD ed

Brands by name

Popular brands