Before using for the first time
^
Clean the inside of the appliance and
the accessories with luke warm water
and a little washing up liquid and
then dry using a soft cloth.
Important: To ensure correct func-
tioning of the appliance, let it stand
for between ½ and 1 hour after
transporting it to its final location be-
fore connecting it to the mains.
Switching on
The refrigerator section and the freezer
section are switched on independently
of one another so that if required only
the one section needs to be switched
on.
Refrigerator section
^
Using a coin turn the On/Off dial for
the refrigerator section in a clockwise
direction away from the "0" position.
Forcing it beyond its range would
damage it. Turn it only as far as it will
go, then turn it back again.
The indicator light for the refrigerator
section will come on. The appliance
starts cooling. The interior light will
come on if the door is opened.
Freezer section
^
Using a coin turn the On/Off dial for
the freezer section in a clockwise di-
rection away from the "0" position.
The alarm indicator light flashes. An
alarm sounds after a short while and
the appliance starts cooling.
Allow the freezer to run for a few hours
before placing food in it. This will en-
sure that the temperature in the freezer
is sufficiently low.
Switching off the alarm
^
Press the alarm button.
The alarm stops. The indicator light re-
mains lit until the freezer temperature
which has been set is reached.
Ice pack
(depending on model)
Place the ice pack in the top drawer or
to save space on the freezer tray. The
ice pack will be at its most effective af-
ter it has been in the freezer for approx.
24 hours.
Operation
10
