Before using for the first time
The stainless steel surface and the
decor strips have a protective cover to
prevent scratching during
transportation.
^
Do not remove this cover until the
appliance has been installed or built
in. Start at one of the upper corners.
^
Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then dry
with a soft cloth.
Important:
To ensure correct functioning of the
appliance, let it stand for between 1/2
and 1 hour after transporting it to its
final location before connecting it to
the mains.
Switching on
The StayFresh zone and the freezer
section are switched on independently
of one another so that, if required, you
can switch on only one section.
StayFresh zone
^
Press the On/Off button for the
StayFresh zone.
A bar will flash in the temperature
display for the StayFresh zone and the
StayFresh zone will start cooling.
The alarm will sound when the appliance
is first switched on as well as to warn if
the temperature gets too "warm".
Freezer section
^
Press the On/Off button for the
freezer section.
Bars will flash in the temperature
display for the freezer section and the
freezer section will start cooling.
The alarm will sound when the
appliance is first switched on as well as
to warn if the temperature gets too
"warm".
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Switching off the alarm
^
Press the alarm button.
The alarm stops. The bars will continue
flashing in the temperature display until
the temperature range set has been
reached.
Cool pack
Place the cool pack in the top drawer or
to save space on the freezer tray. The
cool pack will be at its most effective
after it has been in the freezer for
approx. 24 hours.
Switching on and off
11