Installation
*INSTALLATION*
32
The anti-tip brackets prevent the refrig-
eration appliance from tipping.
The anti-tip brackets are also used to fix
the building-in niche securely to the
surrounding walls.
Use 2 anti-tip brackets
for each in-
dividual appliance or 4 anti-tip brack-
ets for each (side-by-side) combina-
tion of 2 appliances.
Position the anti-tip brackets
on
the left and right of the building-in
niche.
Depending on the subsequent adjust-
ment of the feet, the anti-tip brackets
are positioned 7'-7' 1 3/4" (2134–
2164 mm) from the floor of the niche.
Risk of injury and damage due to
tipping refrigeration appliance.
If the anti-tip brackets are fixed too
high up, they cannot be used to se-
cure the refrigeration appliance.
The distance between the
anti-tip brackets and the refrigeration
appliance must not exceed
5/16" (8 mm).
Make sure that the gap between the
refrigeration appliance’s rear wall and
the building-in niche does not exceed
2" (51 mm).
Place a wooden wedge behind the
anti-tip brackets
if necessary.
While holding the anti-tip brackets in
place, mark the necessary drill holes
on the rear wall of the installation
niche.
Summary of Contents for KF 2801 Vi
Page 137: ......
Page 138: ......
Page 140: ...M Nr 10 785 170 04 en US CA KF 2801 Vi KF 2811 Vi KF 2901 Vi KF 2911 Vi ...
