Moving the shelves
The shelves can be adjusted according
to the height of the food.
^
Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
Stoppers prevent the shelves from
being dislodged by mistake.
Split shelf
In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.
^
Pull the front half of the glass shelf
forwards slightly and then push it
carefully under the rear half.
To move the split shelf:
^
Take both halves of the split glass
shelf out,
^
fit the two brackets onto the supports
on either side at the required height,
^
and push the glass shelves in one
after the other.
The shelf with the raised edge must
be at the back.
Adjusting the door shelf/bottle
shelf
^
Push the door/bottle shelf upwards,
then remove it by pulling it forwards.
^
Replace the door/bottle shelf at the
required position. Ensure that it is
securely pushed back into position.
Moving the bottle divider
(depending on model)
The bottle divider can be moved to the
left or right to ensure that bottles are
held securely in position when the door
is opened and shut.
The bottle divider can be removed
completely (e.g. for cleaning).
^
To do this, push up the front edge of
the bottle divider, and disengage it.
Adjusting the interior fittings
23
