Miele K 9758 iDF Operating And Installation Manual Download Page 48

Page: 48 / 60

Do not separate the soft-close
mechanism from the ball joint. This
would damage the mechanism.

Stand the appliance door up, and
slacken the hinges at the front (the
hinges remain open).

Remove screws

, and place the

stoppers supplied

in the empty

holes.

Do not

close up the hinges. Danger

of injury.

Replace the hinges in their diagonally
opposite corners

Use a powered screwdriver to secure
the hinges; screws

are

self-tapping.

To secure the soft-close mechanism

Place the door with the outer side
downwards on a stable surface.

Screw ball joints

of soft-close

mechanism

into the new fixing

holes.

Open out soft-close mechanism

and hook mounting

onto the hinge.

Hold the soft-close mechanism in this
position, and screw mounting

the hinge.

Changing the door hinging

Summary of Contents for K 9758 iDF





























































Search results

Summary of Contents for K 9758 iDF

Reviews:

Related manuals for K 9758 iDF

Brands by name

Popular brands

Miele K 9758 iDF, Operating And Installation Manual

Search results

Summary of Contents for K 9758 iDF

Reviews:

Related manuals for K 9758 iDF

Brands by name

Popular brands