Preparing the appliance
^
Slide cover strip
a
into the holder in
the middle of the appliance as
illustrated with the bumps facing
downwards. The bumps will fit into
the keyhole slots.
^
Position the mains electricity cable so
that the appliance can be connected
easily once installed.
^
Push the appliance two-thirds of the
way into its niche.
When doing this, make sure that the
mains cable does not get trapped.
^
With 16 mm thick furniture walls:
clip spacers
b
over the hinges.
^
Open the appliance door.
^
Using a screwdriver, remove cover
c
from the top corner of the
appliance.
^
Fit cover
d
onto fixing bracket
e
.
^
Secure fixing bracket
e
to the top of
the appliance with screws
f
(M5 x 15).
Building in the appliance
47
Summary of Contents for K 9454 iF
Page 41: ...Niche height mm A K 9454 iF 1220 1236 Building in dimensions 41 ...
Page 54: ...54 ...
Page 55: ...55 ...
Page 56: ...Alteration rights reserved 0609 K 9454 iF M Nr 07 297 090 02 ...
