^
Unscrew the lamp and replace it with
a new one.
Lamp specification:
220 - 240 V, max. 25 W, E 14 fitting.
^
Screw the new lamp into the
connection. Ensure it goes in
correctly and that the seal
c
makes
a tight fit.
^
Replace the cover by clipping it in at
the rear and then pressing it in at the
sides.
. . . the floor of the refrigerator is wet.
The drain hole is blocked.
^
Clean the condensate channel and
drain hole.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
To prevent unnecessary loss of
temperature it is advisable not to
open the door while waiting for the
appliance to be serviced.
Problem solving guide
23
Summary of Contents for K 8652 SD
Page 33: ...33 ...
Page 34: ...34 ...
Page 35: ...35 ...
Page 36: ...Alteration rights reserved 4704 K 8652 SD K 8852 SD M Nr 06 505 650 00 en GB ...
