. . . the interior light does not work
although the appliance is working.
^
Check to see whether the light switch
can be moved.
If it moves, the light bulb could be
defective and need to be replaced:
^
Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket
(pull by the plug not the cable), or
disconnet the mains fuse or remove
the screw-out fuse in countries where
this is applicable.
^
Press the sides of the lamp cover
inwards, disengage the cover and
unclip it at the rear.
^
Unscrew the bulb and replace it with
a new one.
Bulb specification:
220 – 240 V, max. 25 W, E 14 fitting
^
When fitting in the new bulb make
sure that it is correctly fitted.
^
Clip the lamp cover back in at the
rear and then press it into position
from the sides.
. . . the floor of the appliance is wet.
The drain hole has become blocked.
^
Clean the condensate channel and
drain hole.
If you still cannot remedy the fault
having followed these suggestions,
then contact the Miele Service
Department.
To prevent unecessary loss of
temperature it is advisable not to
open the door while waiting for the
appliance to be serviced.
Problem solving guide
26
Summary of Contents for K 841i
Page 40: ... Place all covers in position Installing the appliance 40 ...
Page 41: ...41 ...
Page 42: ...42 ...
Page 43: ...43 ...
