Installation
*INSTALLATION*
14
Installation site
Risk of damage and danger of
injury due to the refrigeration appli-
ance tipping over.
This refrigeration appliance is very
heavy and can tip forwards when the
appliance door is open.
Keep the appliance door(s) shut until
the refrigeration appliance has been
built in. The refrigeration appliance
must be secured in its building-in
niche in accordance with the operat-
ing and installation instructions.
Due to its weight and size, the refri-
geration appliance must be installed
by two people.
Fire risk and risk of damage from
appliances which give off heat.
Appliances which give off heat can
catch fire and set fire to the refrigera-
tion appliance.
This refrigeration appliance must not
be installed underneath a hob.
Fire risk and danger of damage
from open flames.
Open flames can set fire to the refri-
geration appliance.
Keep open flames (e.g. a candle)
away from the refrigeration appli-
ance.
This appliance should be installed in a
dry, well-ventilated room.
When deciding on the installation site,
please bear in mind that your refrigera-
tion appliance will use more energy if
installed near to a heater, a cooker or
other appliance that gives off heat.
Avoid direct sunlight.
The higher the room temperature, the
longer the compressor runs and the
higher the energy consumption is.
Risk of damage due to corrosion.
In environments with high humidity,
condensation can build up on ex-
ternal refrigeration appliance panels.
This condensate can cause corrosion
on external appliance panels.
Install the refrigeration appliance in a
dry and/or air-conditioned room with
sufficient ventilation.
After installation please make sure
that the appliance door(s) closes
(close) properly and the refrigeration
appliance is installed in accordance
with these installation instructions. It
is essential to comply with the spe-
cified ventilation cutout require-
ments.
Summary of Contents for K 7113 F
Page 42: ......
