Building under
40
Fitting the plinth facing
Place the plinth facing along the run
of units
.
Mark protruding section
A
on the
ventilation grill console
with a pen-
cil, then take the plinth facing
away.
Cut protruding section
A
off the vent-
ilation grille console.
If the cut line is not concealed by the
front edge of the plinth facing you will
need to use the cut line further
back
.
Remove the vertical tabs
with a
pair of pliers.
The supports
on the ventilation
grille will also need to be trimmed to
size by dimension A (= protruding
section on the ventilation grille con-
sole).
Secure the plinth facing to the kitchen
run
.
Push the ventilation grille onto the
console
.
