Miele K 3414 SD Operating And Installation Manual Download Page 24

Page: 24 / 28

Changing the door hinging

The appliance is supplied right hand
hinged. If you want it left hand hinged
follow the instructions below.

Open the appliance door.

Use a screwdriver to lever the plinth
facia

out, then pull it forwards and

off.

Use a screwdriver to remove cover

then close the door.

Remove screw

completely.

Pull door support

together with

hinge pin

downwards, then tilt it

forwards and take it off.

Open the appliance door, move it
downwards and take it off.

Unscrew the upper hinge pin

using the spanner supplied and refit
on the opposite side.

Remove spacer

with a screwdriver

and refit it on the opposite site.

Remove plugs

from door bearing

bushes in the door and refit on the
opposite side.

Hang the door in hinge pin

(re-

member to use the washers

), then

close the door.

Changing the door hinging

Summary of Contents for K 3414 SD





























Search results

Summary of Contents for K 3414 SD

Reviews:

Related manuals for K 3414 SD

Brands by name

Popular brands

Miele K 3414 SD, Operating And Installation Manual

Search results

Summary of Contents for K 3414 SD

Reviews:

Related manuals for K 3414 SD

Brands by name

Popular brands