Adjusting the interior fittings
31
Moving the shelves
The shelves can be adjusted according
to the height of the food.
Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge on the protective strip
at the back must face upwards to pre-
vent food from touching the back of the
appliance and freezing to it.
Stoppers prevent the shelves from be-
ing dislodged by mistake.
Moving split shelves
In order to accommodate tall items in
the appliance such as bottles or large
containers, one of the shelves is di-
vided. The front section can be pushed
carefully under the rear section:
Push the rear half of the glass shelf
slightly upwards.
With the rear half pushed up, lift the
front half of the glass shelf up slightly
at the front, then slide it carefully un-
derneath the rear half.
To move the split shelf to another
level take both sections out of the ap-
pliance.
Then place the two support rails on
the left and right support ribs at the
desired height and
slide the two sections in one after the
other.
The section with the raised edge must
be fitted at the back.
Summary of Contents for K 28202 D edt/cs
Page 61: ......
Page 62: ......
Page 64: ...M Nr 10 538 950 00 en GB K 28202 D ws K 28202 D edt cs ...
