The appliance door can be aligned to
the housing using the outer long slots in
the lower hinge plate.
In the following illustration the door
is shown open to make it easier to
see what you have to do.
^
Remove centre screw
a
from the
hinge plate.
^
Slightly loosen both outer screws
b
.
^
Align the door by sliding the hinge
plate to the left or right.
^
Then tighten screws
b
again. Screw
a
does not need to be refitted.
Aligning the appliance
47
Summary of Contents for K 14820 SD ed
