Cleaning and care
Before any cleaning or maintenance
work the cooker hood must be dis-
connected from the mains supply.
Ensure that:
- it is switched off at the fused spur
connection or
- the mains fuse is withdrawn
Ensure current is not supplied to the
appliance while maintenance or re-
pair work is being carried out.
Housing
Lacquered surfaces can be cleaned
using hot water to which a little mild
washing-up liquid has been added.
Dry with a soft cloth.
For stainless steel surfaces a mild non-
abrasive proprietary stainless steel
cleaner is suitable.
Never use cleaners which scour or
contain chlorine, acids or soda.
These would damage the surface of
the cooker hood.
Grease filters
Re-usable metal grease filters are fitted
which remove solid particles (oil, dust,
etc.) from the kitchen vapours, prevent-
ing soiling of the cooker hood.
The grease filters should be cleaned
regularly to avoid a build-up of fat, (ap-
prox. 3-4 weeks on average, but
sooner if necessary). Always clean the
filters immediately if the lamp for the
grease filter touch control comes on.
An over saturated filter is a fire ha-
zard.
– To remove the grease filters pull the
quick-release catches.
– Carefully remove the filters in a down-
wards direction.
– Clean the filters
–
by hand:
with a nylon brush in a
mild solution of warm water and
washing up liquid.
–
in a dishwasher:
place the filter
with the short side upright in the
lower basket, ensuring the spray arm
is not obstructed.
Cleaning and care
14
Summary of Contents for Imperial DIF 970 EX
