Miele HS11, Operating Instrucktion

Page: 29 / 128

~
While the vacuum cleaner is under guarantee, repairs
should only be undertaken by a Miele authorised service
technician. Otherwise the guarantee will be invalidated.
~
Do not pull or carry the appliance by the cable, and be
careful not to damage the cable when withdrawing the
plug from the socket.
Keep the cable away from sharp edges and do not let it be
squashed, for example, under a door.
Avoid running the vacuum cleaner over the cable. This
could damage the cable, plug or socket. The appliance
must not be used if any of these have suffered damage.
~
Do not use the vacuum cleaner if the cable is damaged.
If the cable is damaged it must be replaced together with a
complete cable rewind. For safety reasons this work must
be done by the Miele Service Department or a Miele
authorised service technician.
~
The socket on the vacuum cleaner (depending on
model) must only be used for the Miele Electrobrush
specified for use with this appliance.
~
When vacuuming especially fine dust, e.g. sawdust,
sand, plaster, flour, talcum powder etc., electrostatic
charges build up naturally. Under certain conditions these
charges will be released. To avoid the unpleasant effects
of these discharges, a metal inlay has been incorporated
into the underside of the handle. Please make sure that you
keep your hand in constant contact with this metal strip
during vacuuming.
en - Warning and Safety instructions
29