What if the vacuum cleaner turns off
while vacuuming?
The vacuum has overheated and the
temperature limiter switched off the
vacuum automatically. This may occur if
the vacuum wand is blocked, the
dustbag is full or fine dust has clogged
the pores of the dustbag. A heavily
soiled exhaust or dust compartment
filter can also cause of overheating.
^
Turn the vacuum off!
^
After removing the blockage or dirty
filter, allow the vacuum to cool for
45 minutes before using again.
Cleaning the air vent
Dirt or blockages can be removed once
the air vent is opened.
^
Open the dust compartment lid by
pressing the release button.
^
Carefully remove the air vent cover in
an upward motion using the two
recessed grips.
^
Clean the air vent.
^
Replace the air vent cover.
^
Close the dust compartment lid
firmly.
Frequently asked questions
33
Summary of Contents for HS09
Page 1: ...Operating Instructions UV M Nr 05 925 521 HS09 ...
Page 2: ...2 ...
Page 12: ...Guide to the vacuum 12 ...
Page 35: ...35 ...
