![background image](http://html.mh-extra.com/html/miele/hg06/hg06_operating-instructions-manual_234901019.webp)
Before using for the first time
19
Displaying and setting the water
hardness level
Turn the dishwasher off with the
button, if it is turned on.
Press the
Start
button and,
simulta‐
neously
, switch the dishwasher on
using the
button.
Keep the
Start
button pressed for at
least four seconds until the
Start
indi‐
cator light comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Press the
button twice.
The
indicator light will flash twice at
short intervals.
The value which has been set for the
water hardness appears as a figure in
the time display (see table) according to
.
will start flashing in the time display.
This is the factory default setting of 1°.
Use the
Start
button to select the val‐
ue which equates to your water hard‐
ness level.
Each press of the button moves you
up a level. When the highest water
hardness level is reached, the setting
starts from the beginning again.
The setting is now stored in memory.
Turn the dishwasher off with the
button.
Summary of Contents for HG06
Page 4: ...Contents 4 Drainage 70 Sound emission testing 71 ...
Page 74: ......