Miele H6461BP Operating And Installation Instructions Download Page 119

Page: 119 / 132

Problem

Possible cause and remedy

The oven does not heat
up.

Check whether the Demo mode has been activated
(see "Settings - Showroom programme").

If Demo mode has been switched on, the oven can be
operated but it will not heat up.

Deactivate Demo mode.

"Power cut - Process
cancelled" appears in
the display.

There has been a power cut which has caused a
current cooking process to stop.

Switch the oven off and then back on again.
Start the cooking process again.

12:00 appears in the
display.

The power supply was interrupted for longer than
200 hours.

Reset the time and date.

The message
"Maximum operating
hours reached" appears
unexpectedly in the
display.

The oven has been operating for an unusually long time
and this has activated the safety switch-off function.

Touch the OK sensor. Touch

to clear the message

"Process finished" from the display. The oven can
then be used again as normal.

"Fault 32" appears in the
display.

The Pyrolytic cleaning programme door lock is not
locking.

Switch the oven off and then back on again.
Then restart the Pyrolytic cleaning programme.

If the fault code appears in the display again, call
Miele.

Problem solving guide

119

Summary of Contents for H6461BP





































































































































Search results

Summary of Contents for H6461BP

Reviews:

Related manuals for H6461BP

Brands by name

Popular brands

Miele H6461BP, Operating And Installation Instructions

Search results

Summary of Contents for H6461BP

Reviews:

Related manuals for H6461BP

Brands by name

Popular brands