Triangle
V
in the display
I60
%
m
T S
V
When a sensor is touched, the
symbols of functions
which can be
altered will light up in the display.
These will vary depending on
programme.
Touch the
V
or
W
sensor repeatedly
until triangle
V
is underneath the
symbol of the required function.
Then select the function using the OK
sensor.
Triangle
V
will flash for approx.
5 seconds.
You can only make entries with the
V
or
W
sensors whilst triangle
V
is
flashing.
If the triangle has stopped flashing,
you will need to call up the function
again with the OK sensor.
The following will change each time the
V
or
W
is touched
– Duration
T
and Finish time
S
in
increments of a minute,
– the Minute minder time
N
, at first in
increments of 5 seconds and then in
increments of a minute.
Touching the sensor for longer, speeds
up the change in the display.
Controls
19