Technical safety
~
Installation, maintenance and
repairs should only be carried out by a
suitably qualified and competent
person in accordance with local and
national safety regulations. Repairs and
other work by unqualified persons
could be dangerous and the
manufacturer will not be held liable.
Ensure current is not supplied to the
appliance until after installation,
maintenance or repair work has been
carried out.
~
Before installation, check the
appliance for visible signs of damage.
Do not install or attempt to use a
damaged appliance. Danger of injury.
~
Do not use the microwave function
of the appliance if
– the door is warped,
– the door hinges are loose,
– holes or cracks are visible in the
casing, the door, the door seal or the
oven interior walls.
Operating the appliance with this type
of damage will result in microwave
leakage and present a hazard to the
user.
~
The electrical safety of this
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and tested regularly, and
where there is any doubt, the
household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for the consequences of an inadequate
earthing system (e.g. electric shock).
~
Before connecting the appliance,
make sure that the connection data on
the data plate (voltage and connected
load) match the mains electricity
supply. This data must correspond in
order to avoid the risk of damage to the
appliance. Consult a competent person
if in doubt.
~
Do not connect the appliance to the
mains electricity supply by an extension
lead or a multi-socket unit. These do
not guarantee the required safety of the
appliance (e.g. danger of overheating).
~
For safety reasons, this appliance
may only be used after it has been built
in.
~
Never open the casing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
highly dangerous to the user and can
cause operational faults.
~
While the appliance is under
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee will be
invalidated.
Warning and Safety instructions
6
Summary of Contents for H 5030 BM
Page 74: ...74 ...
Page 75: ...75 ...
Page 76: ...Alteration rights reserved 22 2709 H 5030 BM H 5040 BM M Nr 07 573 080 02 ...
