manualshive.com logo in svg

Miele H 4541, Operating And Installation Manual

Share
Download
Miele H 4541 Operating And Installation Manual Download Page 18

Calibration of the baking sensor

i

Sensor calibrating.

Please wait.

If this message appears in the display, the built-in baking
sensor is calibrating itself.
The whole procedure takes approx. 5 minutes.
During this time the sensor electronically measures
conditions in the oven. This enables the sensor to be set to
the appliance’s specific conditions.

This measurement is repeated at regular intervals to enable
the sensor to continually monitor conditions in the oven.

Cleaning and heating up for the first time

Before use, please remove
-

any stickers from the floor of the oven, baking trays,
grill pan etc.

-

the protective cork discs from the sides of the oven.

-

any protective foil from the oven front.

See "Cleaning and care" for more information.

Before using the oven for the first time

– Take

all accessories

out of the oven and wash them.

– then

heat the oven up once with nothing in it

. New

ovens have a slight smell on first use and this will dissipate
the smells before you use it to cook any food.

Before using for the first time

18

Summary of Contents for H 4541

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands